Description
General Formulations GF 333 AutoMark™ DRIFT® PW 3.0 mil Polymeric Wrap Film with Grey Slideable Repositionable Adhesive
GF 333 AutoMark™ DRIFT® PW is a 3.0 mil polymeric gloss white conformable print media with a grey repositionable acrylic adhesive on a slideable air-egress layflat liner. DRIFT Technology allows the installer to float or drift the media over top of the OEM painted surface. The installer can then position and reposition the media until they are ready to engage the adhesive on the PSA film. GF 333 is designed to accept a variety of solvent, latex and UV curable inks common to wide format digital printing systems. The grey repositionable adhesive offers excellent opacity and exceptional repositionability and slideability. GF 333 AutoMark™ DRIFT® PW is specifically engineered for use in partial vehicle wrap, fleet, and decal applications.
Specifications
| Film Type | White Polymeric Vinyl |
|---|---|
| Film Thickness (mil) | 3.0 |
| Adhesive | Solvent Acrylic |
| Release Liner | White PE-Coated Kraft, Slideable Air Egress |
| Outdoor Durability | Up to 7 years |
Applications
General Formulations lists GF 333 for signage (general) and vehicle.
- General Signage
- Vehicle Graphics
Ink and printer compatibility
Ink types listed by General Formulations: Solvent, Eco-Solvent, Latex, UV Curable, Screen, Offset (UV Curable).
Matching printers at DTG: Epson SureColor S-Series solvent printers, HP Latex and resin printers, UV flatbed printers. Confirm media settings with your printer and RIP profile.
Roll sizes
| GF part # | Size |
|---|---|
| 333-54 | 54″ x 150′ |
| 333-54300 | 54″ x 300′ |
| 333-60 | 60″ x 150′ |
| 333-60300 | 60″ x 300′ |
Per General Formulations, 300' rolls may contain a splice. Durability statements are General Formulations estimates and do not constitute a written warranty; see the GF technical data sheet.
Frequently asked questions
Can I use AutoMark™ DRIFT® PW for full car wraps?
The PW in the product name stands for “Partial Wrap”. GF 333 is ideally suited for flat surfaces, simple curves and gentle corrugations (not intended for rivets).
What does “slideable” mean?
The slideable adhesive allows the film to “DRIFT” on the OEM painted surface. This allows for easy repositioning. Once pressure is put upon the film, the adhesive will be activated.
What are “air-egress” channels?
GF 333 has a slideable air-egress liner. This liner has micro-embossing and a pattern is transferring to the adhesive. During application, this pattern allows air to be forced out from behind the film, thus helping to achieve bubble free results.
Is GF 333 good for print-n-cut lettering?
No, GF 333 is not intended for small print-n-cut lettering due to the specially design micro-channel liner. It’s designed for partial wraps as well as medium-large graphics. It is best to use a smooth 90# liner when this type of graphic design is needed.
Related General Formulations products
- GF 302QS Quick-Split™ 3.4 mil MATTE WHITE VINYL
- GF 364 3.0 mil Matte White Vinyl with Clear Permanent Adhesive
- GF 364OP 3.0 mil Matte White Vinyl with Grey Permanent Opaque Adhesive
- GF 364OPAE 3.0 mil Matte White Vinyl with Grey Permanent Opaque Adhesive
- GF 365 3.0 mil Gloss White Vinyl with Clear Permanent Adhesive
All General Formulations media at DTG
General Formulations GF 333 technical data sheet (PDF)
Product information from General Formulations (official product page). Specifications may change; check current GF literature for critical applications.
Questions about GF media? Call DTG (Digital Technology Group) in Tampa, FL at 813.889.0660 or 800.681.0024, or contact us online.
