Description
Avery Dennison’s North America product data sheet (Revision 7, dated 03/17/20) describes MPI2920 Matte and MPI2922 Matte as “tough, scuff-resistant, flexible white promotional calendered vinyl film” and “an economical choice for applications requiring an economy-calendered film with permanent or removable adhesive performance.” This listing is the permanent MPI2920 grade (catalog description: matte, permanent, StaFlat, 54" × 50 yards, 3" core).
On that sheet, MPI2920 uses a permanent clear acrylic adhesive and a 90# StaFlat liner. Application surfaces are “Flat, simple curves (restricted to non-spill areas).”
Features listed: consistent printability; great image clarity and color pop; opaque; dimensionally stable liner for easy converting; ICC profiles available on Avery Dennison’s website. Conversion methods listed: solvent-based inkjet; mild/eco solvent inkjet; latex inkjet; UV inkjet.
Common applications listed: fleet (flat and simple curve only); vehicle (flat and simple curve only); wall murals; POP / trade show; outdoor signage; floor graphics; ice rink boards / dasher boards.
The sheet’s opening face callout and the physical-characteristics table both state a 3.4 mil matte face. Those two lines print different micron conversions for that same 3.4 mil figure, so this page reports the consistent 3.4 mil value and does not choose between the micron pairings.
| Face | 3.4 mil matte (promotional / economy calendered vinyl) |
|---|---|
| Adhesive (MPI2920) | Permanent acrylic, clear |
| Liner | 90# StaFlat |
| Adhesive caliper | 1.0 mil (25 µm) |
| Dimensional stability | <0.025" (0.66 mm). Note: ink loads in excess of 250% may cause increased shrinkage and/or increased initial adhesion of the printed film |
| Gloss | Hunter Gloss @ 60 degrees: 55 |
| Adhesion, 15 min (MPI2920 permanent) | 5.5 lbs/in (962 N/m) |
| Flammability | Self extinguishing |
| Shelf life | 2 years from date of manufacture at 68°–77°F (20°–25°C) and 50±5% RH |
| Durability, vertical exposure | Unprinted: 5 years; printed: see ICS Performance Guarantee for printer-specific information |
| Min. application temperature | 50°F (10°C) |
| Service temperature | -40° to 180°F (-40° to 82°C) |
| Chemical resistance | Resistant to most mild acids, alkalis, and salt solutions |
| This listing’s roll description | 54" × 50 yards, 3" core (catalog) |
Related products
Source: Avery Dennison MPI2920 / 2922 Matte Calendered PDS, Rev. 7, 03/17/20.
Questions about this product? Call a DTG specialist at 813.889.0660.





