Description
F0M63A is the HP Latex Media Loading Accessory. The HP Latex 300 Printer Series User’s Guide (Edition 2, c04276511) lists that name and part number in the accessories table. In the printer-models table the same guide calls it the HP Latex Substrate-Loading Accessory and shows it supplied with — and available as an optional accessory for — the HP Latex 360 and HP Latex 370. The loading chapter is titled “The loading accessory (360 and 370 only).”
HP writes that the loading accessory is designed to help in loading banner, textile and mesh substrates. It is recommended when loading those substrates, but not obligatory. The accessory uses white flaps over the leading edge of the substrate; black patches on the accessory are magnetic and grip the substrate so you can lift the accessory and the leading edge together, then complete an assisted manual load.
The same guide notes that the HP Latex 3×0 Series Edge Holders (F0M64A) can be used whether or not you use the loading accessory. Also see the HP Latex 3×0 Maintenance Kit (F0M59A).
Specifications
| Official name | HP Latex Media Loading Accessory |
|---|---|
| HP part number | F0M63A |
| Documented printers | HP Latex 360 and HP Latex 370 |
| Intended substrates | Banner, textile and mesh (recommended, not obligatory) |
| Guide | HP Latex 300 Printer Series User’s Guide, Edition 2 (c04276511) |
Questions about compatibility, sizing, or installation? Call Digital Technology Group at 813.889.0660.




