Description
The Graphtec PM-CR-015 is the replacement cutting mat (cutting strip) for the Graphtec CE8000-130 cutting plotter. It is the strip under the carriage that the blade tip runs on as it cuts. Graphtec America describes it as a 2-pack teflon cutting strip, 10 mm wide, with adhesive on one side and a rigid teflon surface on the other; the strip length matches the CE8000-130.
| Graphtec part number | PM-CR-015 |
|---|---|
| Type | Replacement cutting mat / cutting strip |
| Used with | Graphtec CE8000-130 (CE8000 User’s Manual supply list) |
| Pack | 2 strips per pack |
| Width | 10 mm |
| Construction | Teflon, adhesive on one side, rigid teflon base on the other (per Graphtec America) |
Graphtec’s manual says to clean the cutting mat with a dry cloth and warns that a mat damaged by a perforation (pounce) cut with the tool holder set backward is a paid service repair, so check tool settings before perforating.
Related: Graphtec CE8000-130 cutting plotter.
Sources: Graphtec CE8000 Series User’s Manual; Graphtec CE8000 series brochure (JE11087); Graphtec America online store (graphtecamericastore.com) product page for PM-CR-015. Checked 2026-11-12.
FAQ
Which cutter does the PM-CR-015 fit?
Graphtec lists PM-CR-015 as the cutting mat for the CE8000-130. The CE8000-40, -60 and -130 each use a different strip length.
How many strips are in the pack?
Two cutting strips per pack.
Questions about this product? Call a DTG specialist at 813.889.0660.













