Description
General Formulations GF 113 Mounting Film 1.0 mil Clear Polyester with Clear Double-sided Adhesive (self-wound)
GF 113 is a double-coated pressure sensitive 1.0 mil clear polyester film with permanent adhesive on one side and removable adhesive on the opposite side. GF 113 is self-wound on a 1.25 mil clear polyester liner printed with “Remove to Expose Adhesive” to identify the removable adhesive. This clear liner allows the graphics to be viewed after application of the 113 mounting adhesive. This product is designed for laminating thin flexible plastic films and papers commonly found in graphics for temporary application to glass. The permanent adhesive is exposed when the product is unwound leaving the removable adhesive protected by the liner. This clear mounting film can be laminated by the cold laminating process without the addition of heat.
Specifications
| Film Type | Clear Polyester Carrier |
|---|---|
| Film Thickness (mil) | 1.0 |
| Adhesive | Emulsion Acrylic |
| Release Liner | Clear Printed Polyester, Silicone both sides |
| Outdoor Durability | Up to 6 months |
Applications
General Formulations lists GF 113 for signage (general, POP and indoor) and windows.
- General Signage
- POP & Indoor Signage
- Windows
Roll sizes
| GF part # | Size |
|---|---|
| 113-38 | 38″ x 150′ |
| 113-51 | 51″ x 150′ |
| 113-54 | 54″ x 150′ |
Durability statements are General Formulations estimates and do not constitute a written warranty; see the GF technical data sheet.
Frequently asked questions
How do I know which side to apply to the printed graphic?
GF 113 is “Self Wound” on the roll, which means it only has one liner. The exposed adhesive side goes toward the graphic.
Which side is the removable side?
When you are finished applying the GF 113 film to your graphc, you will have a finished piece that will have the words “REMOVE TO EXPOSE ADHESIVE” on the face of the printed graphic. This is the side that is applied to the glass surface.
Is GF 113 product clear?
The GF 113 has good clarity, but is not considered “optically clear”.
What types of applications is GF 113 good for?
This clear mounting film is designed to mount digital prints, screen printed and other printed images to glass to produce a cleanly removable graphic. In all cases the substrates must be clean and free of dust, dirt and oil.
Related General Formulations products
- GF 112 Mounting Film 1.0 mil Clear Polyester with Clear High-tack Double-sided Adhesive (self-wound)
- GF 114 Mounting Film 1.0 mil Clear Polyester with Clear Double-sided Adhesive (self-wound)
- GF 116 Mounting Film (AE) 1.0 mil Clear Polyester with Clear Double-sided Adhesive
- GF 117 Mounting Film (AE) 1.0 mil Clear Polyester with Clear Double-sided Adhesive
- GF 118 Mounting Film 1.0 mil Polyester with Clear Double-sided Adhesive
All General Formulations media at DTG
General Formulations GF 113 technical data sheet (PDF)
Product information from General Formulations (official product page). Specifications may change; check current GF literature for critical applications.
Questions about GF media? Call DTG (Digital Technology Group) in Tampa, FL at 813.889.0660 or 800.681.0024, or contact us online.
