Marabu ClearShield Transit V2 Part A Liquid Laminate, Gloss, Gallon (360259111)

$115.30

  • ClearShield Transit V2 Part A, Gloss
  • Gallon
  • Marabu part 360259111
  • Mix 8:1 with Transit V2 Part B
Add to Wishlist
Add to Wishlist
SKU: 360259111

Description

Marabu ClearShield Transit V2 Part A Liquid Laminate, Gloss, Gallon is Part A of Marabu’s two-component ClearShield Transit V2 system. ClearShield Transit V2 is a two-component, water-based liquid laminate that dries clear and protects inkjet prints on truck tarpaulins and other truckside graphics, for long-term outdoor use. Marabu’s data sheet calls for mixing Part A with Part B at 8:1 by volume. The mixed coating has a 3-hour workable life and is applied with a short-nap roller or HVLP spray. Sold here in a gallon container (Marabu part 360259111). Marabu’s volume chart pairs 1 gallon of Part A with 16 oz of Part B.

  • Two-component water-based liquid laminate (Part A)
  • Made for truck tarpaulins and truckside prints
  • Mix 8:1 with Transit V2 Part B (1 gallon to 16 oz)
  • Roller or HVLP spray application

Marabu ClearShield Transit V2 Part A Liquid Laminate, Gloss, Gallon specifications

Marabu part number 360259111
Product line ClearShield Transit V2
Component Part A
Finish Gloss
Container Gallon
Chemistry Two-component, water-based (aqueous polyurethane dispersion)
Mix ratio 8:1 Part A to Part B by volume
Pot life 3 hours at 20 °C once mixed
Application Short-nap roller or HVLP spray gun
Typical uses Truck tarpaulins and truckside graphics

Related products

Browse all Marabu products at DTG and our full range of liquid coatings and liquid laminates.

Source: ClearShield Transit technical data sheet (Marabu North America); Marabu application method guide (BMG); ClearShield coatings chart from BMG, Marabu’s U.S. master distributor.

Questions about the right coating for your ink and media? Call a DTG specialist at 800.681.0024 or email info@dtgweb.com.

Marabu ClearShield Transit V2 Part A Liquid Laminate, Gloss, Gallon FAQ

What is the mix ratio?

Marabu’s data sheet calls for 8 parts Part A to 1 part Part B by volume. One gallon of Part A takes 16 oz of Part B.

How long is the mixed coating usable?

Marabu lists a pot life of 3 hours at 20 °C once mixed.

How long does it take to dry?

Marabu says to allow 24 hours to dry. Drying takes longer at lower temperatures and higher humidity.

nn