Description
Marabu ClearShield Transit V2 Part B Crosslinker, 16 oz is Part B, the crosslinker, of Marabu’s two-component ClearShield Transit V2 system. ClearShield Transit V2 is a two-component, water-based liquid laminate that dries clear and protects inkjet prints on truck tarpaulins and other truckside graphics, for long-term outdoor use. Marabu’s data sheet calls for mixing Part A with Part B at 8:1 by volume. The mixed coating has a 3-hour workable life and is applied with a short-nap roller or HVLP spray. Sold here in a 16 oz container (Marabu part 360256121), the Part B amount Marabu pairs with 1 gallon of Part A.
- Part B (crosslinker) of ClearShield Transit V2
- Pairs with 1 gallon of Transit V2 Part A
- 8:1 Part A to Part B by volume
- For truck tarpaulins and truckside prints
Marabu ClearShield Transit V2 Part B Crosslinker, 16 oz specifications
| Marabu part number | 360256121 |
|---|---|
| Product line | ClearShield Transit V2 |
| Component | Part B (crosslinker) |
| Container | 16 oz |
| Mix ratio | 8:1 Part A to Part B by volume |
| Use with | ClearShield Transit V2 Part A, 1 gallon |
Related products
Browse all Marabu products at DTG and our full range of liquid coatings and liquid laminates.
Source: ClearShield Transit technical data sheet (Marabu North America); Marabu application method guide (BMG); ClearShield coatings chart from BMG, Marabu’s U.S. master distributor.
Questions about the right coating for your ink and media? Call a DTG specialist at 800.681.0024 or email info@dtgweb.com.
Marabu ClearShield Transit V2 Part B Crosslinker, 16 oz FAQ
What is the mix ratio?
Marabu’s data sheet calls for 8 parts Part A to 1 part Part B by volume. One gallon of Part A takes 16 oz of Part B.
How long is the mixed coating usable?
Marabu lists a pot life of 3 hours at 20 °C once mixed.
How long does it take to dry?
Marabu says to allow 24 hours to dry. Drying takes longer at lower temperatures and higher humidity.













