Description
Marabu ClearShield Anti-Graffiti Liquid Coating (Part A), Gloss, Quart is Part A of Marabu’s two-part ClearShield Anti-Graffiti coating. ClearShield Anti-Graffiti is a two-part, water-based liquid laminate with excellent chemical and abrasion resistance and strong anti-graffiti properties, made for signage, billboards, banners and wall coverings in areas at risk of spray paint, latex paint and marker vandalism. It is compatible over solvent, UV, latex and eco-solvent inks and is applied by short-nap roller, high-density foam roller or spray. Mix Part A to Part B at 8:1 by volume. Marabu’s mixing chart calls for 4 fl. oz of Part B per quart. Sold here in a quart container (Marabu part 360264581).
- Part A of the two-part ClearShield Anti-Graffiti system
- Graffiti can be cleaned off with a range of solvents
- Compatible over solvent, UV, latex and eco-solvent inks
- Mix 8:1 with Anti-Graffiti Part B
Marabu ClearShield Anti-Graffiti Liquid Coating (Part A), Gloss, Quart specifications
| Marabu part number | 360264581 |
|---|---|
| Product line | ClearShield Anti-Graffiti |
| Component | Part A |
| Finish | Gloss |
| Container | Quart |
| Chemistry | Two-part, water-based |
| Mix ratio | 8:1 Part A to Part B by volume |
| Application | Short-nap roller, high-density foam roller or spray |
| Typical uses | Signage, billboards, banners and wall coverings |
Other sizes of Marabu ClearShield Anti-Graffiti Liquid Coating (Part A), Gloss
Related products
Browse all Marabu products at DTG and our full range of liquid coatings and liquid laminates.
Source: Marabu North America ClearShield Anti-Graffiti page; ClearShield Anti-Graffiti product information (PDF); Anti-Graffiti mixing chart (PDF).
Questions about the right coating for your ink and media? Call a DTG specialist at 800.681.0024 or email info@dtgweb.com.
Marabu ClearShield Anti-Graffiti Liquid Coating (Part A), Gloss, Quart FAQ
What is the mix ratio?
8:1 Part A to Part B by volume. Marabu’s chart lists 4 fl. oz of Part B per quart and 16 fl. oz per gallon of Part A.
What inks can it go over?
Marabu lists solvent, UV, latex and eco-solvent inks.
How is it applied?
By short-nap roller, high-density white foam roller or spray equipment such as an HVLP gravity-fed spray gun.













