Description
Keencut’s AZ hot knife holder product sheet describes HOTAZ as the AZ hot knife holder. Used with a Sabre Series 2, “the holder provides AZ hot knife users with a safe, quick and accurate means of cutting and sealing synthetic fabrics.” The sheet says the holder “includes features such as spring loaded mounting block for easy mounting to the cutter’s slideway and a spring loaded trigger to automatically activate the hot knife when depressed,” and that it “uses a bearing and slide system designed for silent operation, user adjustment and minimal maintenance.”
The sheet states: “There is a different holder to suit the HSGM hot knife (HOT).”
It then prints this official restriction: “Use only with the following Keencut Machines:”
- Sabre Series 1 & 2
- Sabre HotCut
- Evolution Series 1 & 2
- Javelin Integra
- Javelin Series 1 & 2 when mounted to a Big Bench only
| Keencut article | HOTAZ |
|---|---|
| Official product name | AZ hot knife holder |
| Function printed on the sheet | Cutting and sealing synthetic fabrics |
| Features printed on the sheet | Spring-loaded mounting block; spring-loaded trigger; bearing and slide system |
| Different HSGM holder | HOT |
Source: Keencut AZ hot knife holder product sheet.
FAQ
Which machines does Keencut say to use HOTAZ with?
Keencut’s sheet says “Use only with” Sabre Series 1 & 2, Sabre HotCut, Evolution Series 1 & 2, Javelin Integra, and Javelin Series 1 & 2 when mounted to a Big Bench only.
Questions about this product? Call a DTG specialist at 813.889.0660.

Keencut HSGM hot knife holder Product Sheet












