Graphtec Two Antistatic Elastic Cords to be used with Magnet Set (51409-060A)

$66.80

Add to Wishlist
Add to Wishlist
SKU: 51409-060A

Description

The Graphtec 51409-060A is a pack of 2 anti-static cords for Graphtec cutting plotters. Graphtec America lists it as compatible with the FC, FCX and CE Series. Graphtec’s anti-static cord is made of fine conductive micro-fibers that bleed static charge to ground; the magnets ground the cord to the metal frame of the cutter. Graphtec America notes that the media does not have to touch the cord, and that the cord fits tight spaces where other static eliminators are not effective. The cords (51409-060A) and the magnets (51409-061B) are separate part numbers and each is sold separately; you need both for an installation.

Graphtec part number 51409-060A
Type Anti-static cord (string)
Pack 2 cords
Compatible Graphtec FC, FCX and CE Series (per Graphtec America)
Required with 51409-061B magnet set, 4 per pack (sold separately)

Installation

  • Pull the cord through the hole from the front (shiny) side of the magnet.
  • Tie a single knot.
  • Pull the knot tight into the hole and trim the excess line.
  • Place the magnet on a metal surface of the side frame below the chassis.

Related: Graphtec 51409-061B magnet set, CE8000-130AKZ (ships with anti-static cords).

Sources: Graphtec America Anti-Static String Installation sheet; Graphtec America CE8000-130AKZ flyer; Graphtec America online store (graphtecamericastore.com) product page for 51409-060A. Checked 2026-11-12.

FAQ

What is in the 51409-060A pack?

Two anti-static cords. The four mounting magnets are a separate part, 51409-061B.

Does the media have to touch the cord?

No. Graphtec America says the media does not have to touch the cord.

Questions about this product? Call a DTG specialist at 813.889.0660.

nn