Description
The Graphtec PM-BH-001 is the pen adapter for the Graphtec CE LITE-50. The CE LITE-50 plots with pens only through this specifically designed adapter, which is sold separately. It holds a commercially available drawing pen; three types of fixing screws are included to suit different pen thicknesses, and Graphtec lists compatible pen diameters of 8.0 to 11.3 mm (Graphtec notes that some pens within that range may not fit).
| Graphtec part number | PM-BH-001 |
|---|---|
| Type | Ballpoint / drawing pen adapter |
| Used with | Graphtec CE LITE-50 |
| Compatible pen diameter | 8.0 to 11.3 mm |
| Included | Three types of fixing screws |
To set a pen, insert it into the adapter from the rear, leave about 3 mm of tip protruding, tighten the fixing screw, then load the adapter in the tool holder (CE LITE-50 User’s Manual).
Related: Graphtec CE LITE-50 desktop cutter, PM-BS-001 standard blade set.
Sources: Graphtec CE LITE-50 User’s Manual; Graphtec America CE LITE-50 blades and pen adapter chart; Graphtec America online store (graphtecamericastore.com) product page for PM-BH-001. Checked 2026-11-12.
FAQ
What pens fit the PM-BH-001?
Graphtec lists pen diameters of 8.0 to 11.3 mm, with three fixing screws for different thicknesses. Some pens in that range may not fit.
Does the CE LITE-50 include a pen adapter?
No. Graphtec says the dedicated pen adapter is sold separately.
Questions about this product? Call a DTG specialist at 813.889.0660.













