Description
The Graphtec FCX4000-50 (Graphtec model FCX4000-50ES) is a flatbed cutting plotter that holds media with an electrostatic panel instead of vacuum. Its effective cutting area of 25.98″ x 19.21″ (660 x 488 mm) fits two A3+ sheets, and Graphtec positions it as an affordable cutting solution for small to medium print-on-demand jobs, including thick or hard materials that cannot be fed through a roll-feed cutting plotter.
Key features
- Dual tool head: cut, plot and crease in the same job
- Creasing in curves, reverse-side creasing and cutting using registration marks, and a fold-line function for micro-flute and cardboard
- Perforation cutting by force control
- Bar-code job selection from USB flash memory for print-and-cut work
- Blade wear display and draft mode for faster arcs
Specifications
| Graphtec model | FCX4000-50ES |
|---|---|
| Effective cutting area | 25.98″ x 19.21″ (660 x 488 mm) |
| Mountable media width (Y) | 21.10″ (536 mm) |
| Configuration | Flatbed, digital servo drive |
| Media hold-down | Electrostatic panel |
| Max. cutting speed | 29.5 in/s (75 cm/s), 23 speed settings |
| Cutting force | Max. 600 gf (5.88 N) on each of 2 tools, 48 steps |
| Number of tools | 2 (dual configuration: cutter blade, pen and creasing tool can be loaded together) |
| Mechanical resolution | 0.005 mm |
| Distance accuracy | Max. 0.2% of distance moved or 0.1 mm, whichever is larger |
| Repeatability | Max. 0.1 mm |
| Interfaces | USB 2.0 (Full Speed), RS-232C, Ethernet 10BASE-T/100BASE-TX |
| Buffer memory | 2 MB |
| Command sets | GP-GL / HP-GL / AUTO |
| Control panel | 3.7-inch graphical LCD (240 x 128 dots) |
| Offline cutting | From USB memory (up to 64 files), with bar-code data management |
| Power | 100–240 V AC, 50/60 Hz; max. 120 VA |
| Software | Graphtec Studio 2 and Cutting Master 5 plug-in, Windows and Mac |
| Warranty | 2 years (Graphtec America) |
| Right-angle accuracy | Max. 0.3 mm over 430 mm (16.93″) |
| Dimensions (W x D x H) | 42.87″ x 35.31″ x 8.03″ (1089 x 897 x 204 mm) |
| Weight | Approx. 63.93 lb (29 kg) |
The FCX4000 User’s Manual lists compatible media including marking film (PVC, fluorescent, reflective), paper under 0.5 mm, compressed foam sheet under 0.8 mm, sandblast rubber under 1 mm, F and G flute board, clear package sheet and high-intensity reflective film.
Standard accessories (Graphtec America): CB15U-1 cutting blade, PHP33-CB15N-HS blade holder, PM-CT-001 blade loupe, PM-CR-002 protect sheet, USB cable 114 in (2.9 m), software download, documents and power cord.
Related: PM-CM-001 film cling mat, PM-CM-002 paper cling mat, protect sheet, CP-001 creasing tool, PM-CT-002 creasing tool, FCX4000-60.
Sources: Graphtec America FCX4000 Series page; Graphtec FCX4000 Series User’s Manual. Checked 2026-11-12.
FAQ
How does the FCX4000-50 hold media?
It uses an electrostatic panel: electrodes inside the table create a charge that holds lightweight media in place without a vacuum pump.
What is the cutting area?
Graphtec lists 25.98″ x 19.21″ (660 x 488 mm), enough for two A3+ sheets.
Can it crease and cut in one job?
Yes. The dual tool head can hold a cutting blade and a creasing tool (or pen) at the same time.
Questions about this product? Call a DTG specialist at 813.889.0660.













