Description
The Graphtec PM-CR-006 is the replacement cutting mat (cutting strip) for the Graphtec FC9000-100 cutting plotter. The FC9000 manual describes the cutting mat as the strip the cutter blade moves on. Graphtec America describes PM-CR-006 as a 2-pack teflon cutting strip, 10 mm wide, with adhesive on one side and a rigid teflon base on the other; the length matches the FC9000-100.
| Graphtec part number | PM-CR-006 |
|---|---|
| Type | Replacement cutting mat / cutting strip |
| Used with | Graphtec FC9000-100 |
| Pack | 2 strips per pack |
| Width | 10 mm |
| Construction | Teflon, adhesive on one side, rigid teflon base on the other (per Graphtec America) |
Graphtec’s FC9000 manual warns that extending the blade too far can damage the cutter blade or the cutting mat, so set blade length to less than the media thickness. Related: Graphtec FC9000-100 cutting plotter.
Sources: Graphtec FC9000 Series User’s Manual; Graphtec FC9000 series brochure (JE11075); Graphtec America online store (graphtecamericastore.com) product page for PM-CR-006. Checked 2026-11-12.
FAQ
Which cutter does the PM-CR-006 fit?
Graphtec lists PM-CR-006 as the replacement cutting mat for the FC9000-100. Each FC9000 width uses its own strip.
How many strips are in the pack?
Two cutting strips per pack.
Questions about this product? Call a DTG specialist at 813.889.0660.













