Dreamscape DreamGuard Satin ProTex3 Topcoat – 55 Gallon Drum (DS-DGUARDPROTEX3-55-SATIN)

$2,958.00 or finance as low as $88.74/monthApply Now

  • DreamGuard Satin ProTex3 protective topcoat from Dreamscape
  • Size: 55 Gallon Drum
  • Satin finish
Add to Wishlist
Add to Wishlist
SKU: DS-DGUARDPROTEX3-55-SATIN

Description

DreamGuard® Protex3 (DS-DGUARDPROTEX3-55-SATIN) is DreamScape’s protective topcoat in a 55 Gallon Drum container. DreamScape’s support article and shop page name the finish as satin — DreamGuard is available only in satin — and list the put-ups as a sample pint, 1 gallon bottle, 5 gallon pail and 55 gallon drum.

DreamGuard protects walls from marks, scuffs, scrapes and staining and is described as ultra protection for high-traffic areas. It is an aqueous coating formulated specifically for DreamScape textured surfaces and also applicable with most other vinyl products printed with non-water-sensitive inks. When dry it is VOC-free, non-yellowing and crack resistant, offers extreme scratch and abrasion resistance, and DreamScape states it is safe for food contact and can be used in close proximity to food (food-service settings). Adding DreamGuard as a topcoat to a Class A wallcovering does not affect flame or smoke certifications; DreamScape says it can be applied to any wallcovering product. Always test a small area first.

Apply where temperature is between 65°F and 75°F, after ink has had time to cure or outgas, and at least 24 hours after adhesive has cured on a newly pasted wall. The surface should be free of dirt, grease and wallpaper paste. DreamGuard can be applied after printing with the work lying flat, or after installation on a wall, using a roller, brush or machine (including a roll-to-roll liquid top coater). A new good-quality ¼-inch nap latex paint roller is specified for hand application. The coating goes on milky white to aid even coverage, is self-leveling (including on deep textures), becomes dry to the touch in about 1–2 hours, and fully cures in 24 hours. Coverage is approximately 800–1,200 square feet per gallon and varies with heavily textured surfaces and application method. Clean up with soap and water. DreamScape notes that, unlike many water-based coatings, DreamGuard can be thawed and used again after freezing — but it is still best protected from freezing.

Check DreamScape’s DreamGuard compatibility chart for your ink and media before coating an entire job. Other satin ProTex3 sizes: 1 pint sample, 1 gallon, 5 gallons. Related install tools include the DreamBlade safety cutter and the felt-edge squeegee bundle.

Specifications

Official name DreamGuard Satin ProTex3 Topcoat
SKU DS-DGUARDPROTEX3-55-SATIN
Size 55 gallon drum
Finish Satin (DreamGuard is available only in satin)
Type Aqueous / VOC-free protective topcoat
Coverage Approximately 800–1,200 sq ft per gallon (varies with texture and method)
Dry / cure Dry to the touch in about 1–2 hours; full cure 24 hours
Application temperature 65–75°F
Cleanup Soap and water
Sources https://dreamscapewalls.com/product/dreamguard-topcoat/ and Dreamscape Support article 5000555601

Questions about compatibility, sizing, or installation? Call Digital Technology Group at 813.889.0660.

nn